To program additional personal entry codes,
repeat steps 1 through 3, then for step 4:
•
Press
3·4
to save personal code 2.
•
Press
5·6
to save personal code 3.
•
Press
7·8
to save personal code 4.
•
Press
9·0
to save personal code 5.
You may also program a personal entry code
using the touchscreen.
Tips:
•
Do not set a code that uses five of the
same number.
•
Do not use five numbers in sequential
order.
•
The factory-set five-digit code will work
even if you have set your own personal
code.
Recalling Memory Positions (If
Equipped)
The programmed entry codes recall driver
memory positions as follows:
•
Entry code 1 recalls driver 1 memory
positions.
•
Entry code 2 recalls driver 2 memory
positions.
•
Entry code 3 recalls driver 3 memory
positions.
Note:
Personal entry codes 4 and 5 will not
recall memory positions.
Note:
The factory-set five-digit code cannot
be associated with a memory setting.
Erasing a Personal Code
1.
Enter the factory-set five-digit code.
2. Press and release
1·2
on the keypad
within five seconds.
3. Press and hold
1·2
for two seconds. You
must do this within five seconds of
completing Step 2.
All personal codes are now erased and only
the factory-set five–digit code will work.
Anti-Scan Feature
The keypad will go into an anti-scan mode if
you enter the wrong code seven times (35
consecutive button presses). This mode
disables the keypad for one minute and the
keypad lamp will flash.
The anti-scan feature will turn off after:
•
One minute of keypad inactivity.
•
Pressing the unlock button on the remote
control.
•
Switching the ignition on.
•
Unlocking your vehicle using intelligent
access.
Unlocking and Locking the Doors
To Unlock the Driver Door
Enter the factory-set five-digit code or your
personal code. You must press each number
within five seconds of each other. The interior
lamps will illuminate.
Note:
All doors will unlock if you disable the
two-stage unlocking feature. See
Locking
and Unlocking
(page 56).
To Unlock All Doors
Enter the factory-set five-digit code or your
personal code, then press
3·4
within five
seconds.
To Lock All Doors
Press and hold
7·8
and
9·0
at the same time
(with the driver door closed). You do not
need to enter the keypad code first.
Displaying the Factory Set Code
Note:
You will need to have two programmed
intelligent access keys for this procedure.
60
MKS (CLE) Canada/United States of America, enUSA, First Printing
Locks
Summary of Contents for MKS 2016
