background image

 

English  

English 

1

 

Safety 

01/11 

 

WARNING

 

This equipment must be used by qualified personnel.  Be sure that all installation, operation, maintenance and repair 
procedures are performed only by qualified person.  Read and understand this manual before operating this equipment.  
Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this 
equipment.  Read and understand the following explanations of the warning symbols.  Lincoln Electric is not responsible 
for damages caused by improper installation, improper care or abnormal operation. 
 

 

WARNING:  This symbol indicates that instructions must be followed to avoid serious personal injury, 
loss of life, or damage to this equipment.  Protect yourself and others from possible serious injury or 
death. 

 

READ AND UNDERSTAND INSTRUCTIONS:  Read and understand this manual before operating 
this equipment.  Plasma cutting or gouging can be hazardous.  Failure to follow the instructions in this 
manual could cause serious personal injury, loss of life, or damage to this equipment. 

 

ELECTRICALLY POWERED EQUIPMENT:  Turn off input power using the disconnect switch at the 
fuse box before working on this equipment.  Ground this equipment in accordance with local electrical 
regulations. 

 

ELECTRIC AND MAGNETIC FIELDS MAY BE DANGEROUS:  Electric current flowing through any 
conductor creates electric and magnetic fields (EMF).  EMF fields may interfere with some 
pacemakers, and welders having a pacemaker shall consult their physician before operating this 
equipment. 

 

CE COMPLIANCE:  This equipment complies with the European Community Directives. 

 

ARTIFICIAL OPTICAL RADIATION:  According with the requirements in 2006/25/EC Directive and  
EN 12198 Standard, the equipment is a category 2.  It makes mandatory the adoption of Personal 
Protective Equipments (PPE) having filter with a protection degree up to a maximum of 15, as 
required by EN169 Standard. 

 

WORK MATERIALS CAN BURN:  Cutting generates a large amount of heat.  Hot surfaces and 
materials in work area can cause serious burns.  Use gloves and pliers when touching or moving 
materials in the work area. 

 

SAFETY MARK:  This equipment is suitable for supplying power for cutting operations carried out in 
an environment with increased hazard of electric shock. 

 

EQUIPMENT WEIGHT OVER 30kg:  Move this equipment with care and with the help of another 
person.  Lifting may be dangerous for your physical health. 

 

CYLINDER MAY EXPLODE IF DAMAGED:  Use only compressed gas cylinders containing the 
correct shielding gas for the process used and properly operating regulators designed for the gas and 
pressure used.  Always keep cylinders in an upright position securely chained to a fixed support.  Do 
not move or transport gas cylinders with the protection cap removed.  Do not allow the torch, work 
clamp or any other electrically live part to touch a gas cylinder.  Gas cylinders must be located away 
from areas where they may be subjected to physical damage or the cutting process including sparks 
and heat sources. 

   

   

   

 

Cutting sparks can cause explosion or fire.  Keep 
flammables away from cutting.  Do not cut near 
flammables.  Have a fire extinguisher nearby, and 
have a watch person ready to use it.  Do not cut on 
drums or any closed container. 

Summary of Contents for INVERTEC PC208











Reviews: