Page Number - 3
Model 1400, 1440, 1442, 1442E, 1444, 1444E
PowerLuber Grease Gun
Form 402103
Safety
Read and carefully observe these operating
instructions before unpacking and operating
PowerLuber. Operate PowerLuber only after
safety instructions and this operation manual
are fully understood.
Never operate PowerLuber in explosive at-
mosphere. Electric power tools can create
sparks which may ignite flammable liquids,
dust or fumes.
Do not use battery charger in damp or wet
locations.
Specifications
Basic PowerLuber Model 1400
Operating Power, Volt
14.4
Maximum Operating Pressure, PSIG (bar)
- Low Output -
7,000 (476)
- High Output -
3,000 (204)
Grease Reservoir Capacity, oz. (g)
14.5 (411)
Operating Temperature Range, °F (°C) 0 to 120
(-18 to +50)
Operating Current, Amp
4.0
Lubricant (Grease)
Up to NLGI #2
Grease output oz./min. (gram/min)
- Low Output (L)
3.8 (108)
- High Output (H)
8.5 (241)
Weight, Lbs. (Kg)
8.0 (3.6)
Accessories:
Battery NiCd Model 1401
Output, VDC
14.4
Capacity, mAh
1700
Battery Charger Model 1410
Charge time
1 Hour
Input, VAC (2.0 A)
120 V, 60 Hz
Model 1410E (for use in Europe)
Input, VAC, (1.0 A)
220 V, 50 Hz
Outlet Hose Model 1230
Pressure Rating, psi (Bar)
7,500 (510)
Length of the Hose, In (mm)
30 (760)
Hydraulic Coupler
for grease fittings
Carying case model
material: Polyeth-
ylene
NOTE:
Operating current and grease output data at
1,000 PSI (69 bar).
General Description
The Lincoln PowerLuber is a fully battery
operational, automatic grease gun. The gun
was developed for manual lubrication of the
grease points and includes a circuit breaker
to stop motor at excessive pressure (7000
PSI or 476 Bar) in the case of a blocked
bearing, fitting or lubrication line.
The PowerLuber is driven by a small, low
voltage electric motor connected to a three-
stage planetary gear transmission. The
rotary motion of the motor is converted into
a reciprocating motion of the plunger using a
yoke mechanism. The PowerLuber is a posi-
tive displacement single acting pump.
Grease gun can develop high pressure - up
to 7,000 PSI (476 Bar). Use safety glasses
and gloves for protection during operation.
Keep hands clear of the exposed rubber
portion of hose.
Extreme pressure may cause nozzle
extension or whip hose to burst. Use only
Lincoln APPROVED hoses and follow
whip hose instructions and warnings.
Models and Components
Sales Model Basic PowerLuber Battery Charger Case
1440
1400
1401
1410
No
1442
1400
1401
1410
1402
1442E
1400
1401
1410E
1402
1444
1400
1401(2)
1410
1402
1444E
1400
1401(2) 1410E
1402
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized parts or failure to follow Mainte-
nance Instructions may create a risk of shock
or injury.
Appropriate use
The PowerLuber was exclusively designed to
pump and dispense lubricant using 14.4 volt
battery power.
The maximum specification ratings should not
be exceeded.
Any other use not in accordance with instruc-
tions will result in loss of claim for warranty or
liability.
