Lincoln 2003 LS Owners Manual And Use Manual Download Page 57

Page: 57 / 297

•

Press “Home”.

•

Press “Add”. Set home by
selecting the correct address,
POI, Previous destination, or
selecting from the map.

To view home, press the home icon (house) on the Destination Entry
screen.

Once home is set, you may select home as a destination.

Adding a home location

•

Select the desired menu item you
wish to set as Home (Address,
Memory Point, Point of Interest,
Previous Destination).

•

Enter the required details.

•

Press OK to set the home
position.

To view the set home position:

From the stored locations menu with home selected, press LIST to view
the location of the stored home position.

SET HOME

Entertainment Systems

Summary of Contents for 2003 LS










































































































































































































































































































Search results

Summary of Contents for 2003 LS

Reviews:

Related manuals for 2003 LS

Brands by name

Popular brands

Lincoln 2003 LS, Owners Manual And Use Manual

Search results

Summary of Contents for 2003 LS

Reviews:

Related manuals for 2003 LS

Brands by name

Popular brands