manualshive.com logo in svg

Lincoln 1999 Continental, Owner'S Manual

The Lincoln 1999 Continental Owner's Manual is an essential guide for all owners. It provides detailed instructions and helpful information on operating and maintaining this luxurious vehicle. Easily download this manual for free from our website, ensuring you have all the necessary knowledge to enhance your driving experience.

Share
Download
background image

Trailer lamps

Do not connect a trailer’s lighting system directly to your vehicle’s
lighting system. To get the proper equipment for hooking up your
trailer’s lamps, see your Lincoln dealer. Be sure to follow their
instructions carefully.

If you do not install trailer lights correctly, you may cause damage to the
vehicle’s lighting system or other vehicle systems.

Driving while you tow

Do not drive faster than 88 km/h (55 mph) when towing a trailer.

Speed control may shut off if you are towing on long, steep grades.

When towing a trailer:

•

Shift out of D (Overdrive) and into 3 (Third) or a lower gear when
towing up or down steep hills. This will eliminate excessive
downshifting and upshifting for optimum fuel economy and transaxle
cooling.

•

Anticipate stops and brake gradually.

Servicing after towing

If you tow a trailer for long distances, your vehicle will require more
frequent service intervals. Refer to your maintenance guide and or
service guide for more information.

Trailer towing tips

•

Practice turning, stopping and backing up in an area before starting on
a trip to get the feel of the vehicle trailer combination. When turning,
make wider turns so the trailer wheels will clear curbs and other
obstacles.

•

Allow more distance for stopping with a trailer attached.

•

The trailer tongue weight should be 10% of the loaded trailer weight.

•

After you have traveled 80 km (50 miles), thoroughly check your
hitch, electrical connections and trailer wheel lug nuts.

•

When stopped in traffic for long periods of time in hot weather, place
the gearshift in P (Park) and increase idle speed. This aids engine
cooling and air conditioner efficiency.

•

Vehicles with trailers should not be parked on a grade. If you must
park on a grade, place wheel chocks under the trailer’s wheels.

Driving

134

Summary of Contents for 1999 Continental

















































































































































































































Reviews:

No comments

Related manuals for 1999 Continental

CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
Kathrein DDA Series User Manual preview
DDA Series
Brand: Kathrein Pages: 7
Yakima SideWinder Installation Instructions And Owner'S Manual preview
SideWinder
Brand: Yakima Pages: 8
Genesis Multiple G9F18 AU000 Quick Start Manual preview
Multiple G9F18 AU000
Brand: Genesis Pages: 3
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
EUFAB 12015 Manual preview
12015
Brand: EUFAB Pages: 12
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
Webasto CC4E Installation And Service Instructions Manual preview
CC4E
Brand: Webasto Pages: 34
JKS OGS125 Installation Instructions preview
OGS125
Brand: JKS Pages: 3
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
Metra Electronics 99-7477 Installation Instructions preview
99-7477
Brand: Metra Electronics Pages: 2
Mobility Networks RPH 35.13 Use And Maintenance Manual preview
RPH 35.13
Brand: Mobility Networks Pages: 52
Alfa Romeo 1966 Spider 105 Faq preview
1966 Spider 105
Brand: Alfa Romeo Pages: 46
TOPPOINT LT95090 Quick Start Manual preview
LT95090
Brand: TOPPOINT Pages: 2
Scion 2013 iQ Warranty & Maintenance Manual preview
2013 iQ
Brand: Scion Pages: 58
Conrad TPMS-001 Operating Instructions Manual preview
TPMS-001
Brand: Conrad Pages: 8
Federal Signal Corporation Cuda TriOptic 351014F Series Instruction Sheet preview
Cuda TriOptic 351014F Series
Brand: Federal Signal Corporation Pages: 4

Brands by name

Popular brands

Load more brands