Lincoln 1997 Continental, Owner'S Manual

Page: 32 / 321

28
Manual tuning adjusts your radio to any allowable
broadcast frequency, whether or not a station is
present on that frequency. (See
All About Radio
Frequencies in this section.)
❑
Using the “SEEK” function
Press the right
a
side of the “SEEK” button to
select the next listenable station up the
frequency band. Press the left
b
side of the
button to select the next listenable station down
the frequency band. By holding the button
down, listenable stations can be passed over to
reach the desired station.
❑
Using the “SCAN” function
Pressing the “SCAN” button will begin the scan
mode up the frequency band, stopping on each
listenable station for approximately five seconds.
To stop the scan mode on the presently
sampled station, press the “SCAN” button again.
❑
Setting the station MEMORY PRESET buttons
Your radio is equipped with 6 station memory
buttons. These buttons can be used to select up
to 6 preset AM stations and 12 FM stations (6
in FM1 and 6 in FM2)
1. Select a band, then select a frequency.
2. Press one of the memory buttons and hold
until the sound returns and the lamp above the
memory button lights up. That memory button
is now set.
3. Follow the above steps for each memory preset
button.
NOTE: Custom memory presets can be recalled
using the keyless entry system. See Memory Profile
System in the Features chapter.
File:04fnasc.ex
Update:Mon Jun 17 14:15:17 1996