Lincoln Foodservice Fusion 2030 Series, Installation & Operating Instructions Manual, Page: 7 / 24

Fusion Toaster Ops Manual 7
GENERAL INFORMATION
The instructions that follow are intended as a guide for preparing for the installation of the Fusion™ Conveyor
Toaster.
First and foremost, each crate should be examined before signing the Bill of Lading to report any visible damage
caused by the trucker in transit and account for the number of crates.
IF THERE IS APPARENT DAMAGE: United States and Canada: Arrangements should be made to file a claim
against the carrier. As Interstate Commerce Regulations require that the claim must be initiated by the consignee.
All shipments to other countries: Freight terms will be developed and extended on an individual basis.
Proper and secure storage facilities should be arranged for the toaster(s), if necessary, to protect it from outdoor or
damp conditions at all times before installation.
UNCRATING
When you have all the crates unloaded, open the crates and remove the plastic covers. Inspect at once for
concealed damage. If anything appears to be damaged, contact the appropriate persons immediately to file a
damage claim. After completing this inspection, finish unpacking the toaster and all other components. Move the
components inside near the area where they will be assembled in the order in which they will be assembled.
FUSION™ ASSEMBLY INSTRUCTIONS – ALL MODELS
The End Crumb Pans may need to be assembled prior to operation. In this case, simply slide each pan under the
end of the conveyor as shown below. Additionally, the Enter/Exit Trays include a design feature that allows them to
“flip up” to a vertical position. This is a design feature for crating and shipping the unit only. The trays should
remain in the horizontal position to allow for “holding” of product (as shown below).
WARNING: !
This equipment is not to be used by children or infirmed persons.
ENTER / EXIT TRAY
CRUMB PANS
ENTER / EXIT TRAY