C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the
needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond
to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability,
with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to
such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has
been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsible manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility
of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
Methods for Controlling the Employee's Route of Exposure
Source
Pathway
Employee
Substitution:
• Process
• Consumable
• Gas
• Procedure
• Advanced Welding
Technology
Isolation:
• Automate and Ventilate
• Regulated Work Area
Ventilation:
• Source Extraction
• Local Exhaust
Ventilation
• General Shop Extraction
and Ventilation
Personal Protective
Equipment
Medical Surveillance
Housekeeping
Clothing & Hygiene
Air monitoring- initial
assessment to demon-
strate potential fume
exposure level below the
applicable standard.
Air monitoring- periodic
assessment of ventilation
controls to demonstrate
continued fume control
below applicable standard.
Air monitoring- frequent
personal monitoring to
determine adequacy of
respirator protection factor.
Training- Welding work
practice controls.
Training- Welding and
ventilation work practice
controls.
Training- PPE training,
operating work practices,
personal hygiene, medical
surveillance, hazard
communication, record-
keeping, etc.
Equipment
maintenance
Ventilation equipment
maintenance
PPE and respirator
maintenance
MC07-10
Environmental Systems Family
High & Low
Vacuum Solutions
