CARTRIDGE AND LENS REPLACEMENT
Replacing Front Clear Cover Lens:
Replace the front cover lens if it is
damaged. Remove ADF holder assembly per Figure 1. Remove front cover lens
from helmet assembly. Carefully remove gasket from cover lens. Install new
cover lens into gasket and assemble to helmet shell. Make sure to assemble
cover lens and gasket into helmet shell the same way as it was removed.
Replacing Inside Clear Lens:
Replace the inside clear lens if it is damaged.
Place your fingernail in recess above cartridge view window and flex lens
upwards until it releases from edges of cartridge view window.
Change the Shade Cartridge:
Remove ADF holder assembly from helmet shell.
See figure 1 for removal. Flex bottom end of the ADF holder to allow ADF car-
tridge to be remove from frame. Install new ADF cartridge into frame per
figure 2 below. Make sure that the ADF cartridge is inserted in ADF holder
correctly as shown. Install ADF holder assembly into helmet shell.
INSTALLING AN AFTERMARKET MAGNIFYING LENS:
Simply slide the magnifying lens into the short rail located on the sides of ADF
holder per Figure 3.
8
Figure
3
Figure
1
Figure
2
