Lincoln Electric Vantage 300 Technical Specifications Download Page 7

Page: 7 / 8

RECOMMENDED OPTIONS

LN-23P Wire Feeder
Portable CV unit for Innershield pipe
welding. Includes drive rolls and guide
tubes. Requires K2393-1 or -2 Input
Cable Assembly and Magnum

Innershield

Gun.

Order K316L-2

Input Cable Assembly for LN-23P
8-socket to 14-pin control cable with
lugged electrode cable for K316L-2 LN-
23P Wire Feeder.
Order:
K2393-1 25 ft (7.6 m)
K2393-2 75 ft (22.9 m)

Magnum

350 Innershield

Gun

(for LN-23P)
Rated 350 amps, 60% duty cycle. For
.068"-5/64" (1.7-2.0 mm) Innershield

wire and includes reduced speed
switch.
Order K345-10

Magnum

SG Spool Gun

Hand held semiautomatic wire feeder.
Requires SG Control Module and Input
Cable.
Order K487-25

SG Control Module
The interface between the power
source and the spool gun. Provides
control of the wire speed and gas flow.
For use
with a spool gun.
Order K488

Input Cable
(For SG Control Module)
For Lincoln engine power sources with
14-pin MS-type connection, separate
115V NEMA receptacles and output
stud connections.
Order K691-10

PLASMA CUTTING

Pro-Cut

Cuts metal using the AC generator
power from the engine-driven welder.
Accepts 3-phase or 1-phase input
power. Requires the K1816-1 Full KVA
adapter kit, if connected for 1-phase
input power.
Order K1580-1

Full-KVA Adapter Kit (1-Phase)
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA 6-50P)
to the full-KVA receptacle on Lincoln
engine-driven welders.
Order K1816-1

Vantage

300

www.lincolnelectric.com

[7]

Precision TIG

225

Ready-Pak

Pkg.

For AC TIG Welding with square wave
performance use the AC generator of
the engine-driven welder to supply
the power (full rated output may not
be available). Easy setup. Includes
torch, Foot Amptrol

and Gas

Regulator

Hose. Re-quires the

K1816-1 Full KVA adapter kit.
Order K2535-1

Invertec

V205-T AC/DC

One-Pak

Package

For AC TIG welding with square wave
performance, use the AC generator
of the engine-driven welder to supply
the power. Easy setup. Includes
torch, parts kit, regulator and hose
kit, Twist-Mate

™

torch adapter, work

cable with Twist-Mate end and foot
Amptrol

. Requires K1816-1 Full-KVA

Adapter Kit.
Order K2350-2

Full - KVA Adapter Kit (1-Phase)
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA 6-50P)
to the full-KVA receptacle on Lincoln
engine-driven welders.
Order K1816-1

WIRE FEEDER OPTIONS

LN-25 PRO Wire Feeder
Portable CC/CV unit for flux-cored
and MIG welding with MAXTRAC

wire drive system. Includes gas
solenoid and internal contactor.
Order K2613-1

Magnum

350 Innershield Gun

(for LN-25 PRO)
For self-shielded wire with 15 ft.
(4.5 m) cable. For .062"-3/32"
(1.6-2.4 mm) wire.
Order K126-2

Drive Roll and Guide Tube Kit
(for LN-25 PRO)
For cored or solid steel wire.
Order KP1697-068

for .068"-.072" (1.8 mm)
KP1697-5/64
for 5/64" (2.0 mm)

Magnum

300 MIG Gun

For .035"-.045" (0.9-1.2 mm) gas-
shielded wire with 15 ft. (4.5 m) cable.
LN-25 PRO Order:

K1802-1 (Includes Connector Kit)