A-6
INSTALLATION
TANDEM MIG TORCH
A-6
MOUNTING THE TORCH
Always insulate the torch from any equipment or
fixturing.
Use M19190 Bracket Arm to Torch Body
Insulator if necessary. (See Figure 4, Torch mounting
dimensions)
Check to make sure the cables are free to flex and do
not get tangled or caught on other equipment. Do not
let the cables drag on moving or hot parts.
Use a collision sensor if there is a risk that the torch
may impact an object when the torch or work piece
moves.
The case of the torch has holes drilled on the back,
left and right sides for mounting the insulator on either
the back or side of the torch. All of the holes are
drilled and tapped for #10-24x.50 screws.
Torch Mounting Dimensions
FIGURE 4
M19190
Summary of Contents for TANDEM IM666-A
Page 22: ...NOTES TANDEM MIG TORCH ...
