8695 5814 / H
REFRIJET GR51
E-11
E -
OPERATOR’S MANUAL
1 - PUTTING THE
PLASMAFIX 51
INTO OPERATION
Selector-switch A1
=
1
(secteur)
Signal lamp A2
=
1
LED N47
=
1
N35 initial display-unit message
Put N14 key in programming position
LED N46
=
1
For 30 seconds, the N51 water safety
device may be activated (circuit
pressurization)
Wait 2 minutes and validate the safety
via the N15 key
LED N51
=
0
Check for possible water leaks
Top up the cooling liquid in order to have
the nominal level.
2 - CIRCUIT BREAKER
This switch must not in any case be used as an
activation button. It must only be used in emergencies.
3 - RECOMMANDATIONS
Once the torch is in place and the circulation pipes are
connected:
Mettre le refrijet en fonctionnement pendant 1
minute environ
Stop the installation
If necessary, adjust the level of liquid in the tank
using heat Freezcool.