Lincoln Electric RANGER 11458, Operator'S Manual

Page: 27 / 52

D-1
MAINTENANCE
D-1
RANGER® 305D (CE)
SAFETY PRECAUTIONS
• Have qualified personnel do all maintenance
and troubleshooting work.
• Turn the engine off before working inside the
machine or servicing the engine.
• Remove guards only when necessary to
perform maintenance and replace them when
the maintenance requiring their removal is
complete. If guards are missing from the
machine, obtain replacements from a Lincoln
Distributor. (See Operating Manual Parts List.)
• Read the Safety Precautions in the front of this
manual and in the Engine Ownerʼs Manual before
working on this machine.
• Keep all equipment safety guards, covers, and
devices in position and in good repair. Keep
hands, hair, clothing, and tools away from the
gears, fans, and all other moving parts when
starting, operating, or repairing the equipment.
Routine Maintenance
At the end of each dayʼs use, refill the fuel tank to
minimize moisture condensation in the tank. Running
out of fuel tends to draw dirt into the fuel system.
Also, check the crankcase oil level and add oil if
indicated.
WARNING
FREQUENCY
DAILY OR BEFORE
STARTING ENGINE
MAINTENANCE REQUIRED
• FILL FUEL TANK.
• CHECK OIL LEVEL.
• CHECK COOLANT LEVEL.
• CHECK AIR CLEANER ELE-
MENT AND HOUSING FOR
DIRTY, LOOSE OR DAMAGED
PARTS.
• CHECK AIR INTAKE HOSE
FOR CRACKS OR LOOSE
CONNECTIONS.
• CHECK AIR INTAKE/EXHAUST
AREAS & RADIATOR FOR
DIRT. CLEAN AS NECESSARY.
• CHECK ALTERNATOR BELT
TENSION AND WEAR.
ITEM MAKE AND PART NUMBER
OIL FILTER KUBOTA 70000-15241
AIR FILTER ELEMENT DONALDSON P822686
FUEL FILTER ELEMENT KUBOTA 15231-43560
BATTERY KUBOTA GROUP 58, 550 CCA
BELT KUBOTA 15881-97011
GLOW PLUGS KUBOTA 16851-65512
INLINE FUEL FILTER KUBOTA 12581-43012
ENGINE MAINTENANCE COMPONENTS
KUBOTA D722 DIESEL ENGINE
KUBOTA D722 DIESEL ENGINE
Service Intervals
Observe the following for service and maintenance. The lubricating
oil change intervals listed in the table below are for Classes CF,CE
and CD lubricating oils of API classification with a low sulfur fuel in
use. If the CF-4 or CG-4 lubricating oil is used with a high-sulfur
fuel, change the lubricating oil at shorter intervals than recommend-
ed in the table below depending on the operating condition.
Every 50 hours
Every 75 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 500 hours
Every 1 or 2 months
Every 800 hours
Every 1500 hours
Every 3000 hours
Every 2 years
Check of fuel lines and clamp bands.
Change of engine oil
Inspect/Clean air cleaner element
and Vacuator™ valve.
Cleaning of fuel filter.
Check the battery electrolyte level.
Check the fan belt tightness.
Check the radiator and hose clamps.
Replacement of oil filter cartridge
Check the intake air lines.
Replacement of Air Filter element.
Replacement of fuel filter element.
Cleaning of water jacket (radiator
interior).
Replacement of fan belt.
Recharging of Battery.
Check of valve clearance.
Check the fuel injection nozzle injec-
tion pressure.
Check of injection pump.
Check of fuel injector timer.
Replacement of battery
Replacement of radiator hoses and
clamp band.
Replacement of fuel pipes and
clamps.
Change the radiator coolant.(L.L.C.)
Replacement of intake air line.
•
*1
•
*1,*2
*3
*3
*3
*3
*4
Intervals Items
IMPORTANT
•
These jobs should be done after the first 50 hours of operation.
*1 Air cleaner should be inspected/cleaned more often in dusty conditions than
the normal conditions.
*2 Follow Service Instructions and Installation Tips for air cleaner in
Section D.
*3 Consult your local KUBOTA Dealer for this service.
*4 Replace only if necessary.
Please see Engine Owners Manual for Warranty Statement in detail.