OPERATION
B-9
USER INTERFACE LAYOUT
FIGURE B.5
1. Process Adjustment Knob: Turn to adjust setpoint (dependent on the process).
2. Process Adjustment Knob: Turn to adjust setpoint (dependent on the process).
3. Menu Knob: Turn to scroll through the menu and press to select a highlighted o
p�on.
4.
S�ck Bu�on: Press to set the system to S�ck mode. This will deac�vate all outputs besides the
s�ck output.
5. TIG B
u�on: Press to set the system to TIG mode. This will deac�vate all outputs besides the TIG
output.
6.
FCAW Bu�on: Press to set the system to FCAW mode. This will deac�vate all outputs besides
the FCAW output.
7.
MIG Bu�on: Press to set the system to MIG mode. This will deac�vate all outputs besides the
MIG output.
8. Memor
y
B
u�ons: Memories can be saved for each welding mode. These can be accessed by
touching the applicable memor
y
b
u�on labeled one through four. To save a memory, hold the
desired memor
y
loc
a�on down un�l the screen indicates the memory is saved.
9. USB Connector: A USB dri
v
e can be inserted to upload/do
w
nload memories and update the user
inter
f
ace s
o�ware.
POWER WAVE 300C
®
