ACCESSORIES
C-2
C-2
V160-S & -T
Retur
n
to
Section
TOC
Retur
n
to
Section
TOC
Retur
n
to
Section
TOC
Retur
n
to
Section
TOC
Retur
n
to
Master
TOC
Retur
n
to
Master
TOC
Retur
n
to
Master
TOC
Retur
n
to
Master
TOC
OPTIONAL ACCESSORIES
AND COMPATIBLE EQUIPMENT
Factory Installed
Electrical Holder and Cable Assembly
Work Cable and Clamp
Strap Packet
Instruction Manual
Field Installed
K870 - Foot Amptrol
tm
for TIG welding. When the
V160-Sʼs Output Control is in the “REMOTE” position,
the foot Amptrol energizes the output and controls the
output remotely. The Foot Amptrol connects directly to
the 6 pin Amphenol.
K963-3 - Hand Amptrol
tm
for TIG welding. When the
V160-Sʼs Output Control is in the “Remote” position,
the hand Amptrol energizes the output and controls the
output remotely. The Hand Amptrol connects directly to
the 6 pin Amphenol.
PTA-17V TIG Torch -
150 Amp air-cooled compact and
durable Tig Torch with integral gas valve for gas control
at the torch. The following 1-piece cable torches can be
used with a K960-1 adapter:
• K1782-6 (12.50 Ft.) 1-Piece Cable
• K1782-8 (25.0 Ft.) 1-Piece Cable
PTA-9FV TIG Torch -
Gas Valve flexible head torch:
• K1781-7 (25.0 Ft.) 1-Piece Cable
PTA-17FV TIG Torch -
Gas Valve flexible head torch:
• K1782-11 (25.0 Ft.) 1-Piece Cable
K960-1-TIG Torch Adapter -
for connection of PTA-
17V torches (1-piece cable) to power sources without
gas passing through the Twist Mate connection.
NOTE:
Any remote control with trigger-only circuit,
such as the K814 Arc Start Switch, will not be sensed
by the V160-S remote control connection, and there-
fore will not allow control of the output.
CABLE PLUGS
K852-50 -
Cable Plug Kit for #1-#2 cable. Attaches to
welding cable to provide quick disconnect from
machine.
TIG Torch Parts Kits -
Parts kits are available for the
PTA-17 TIG torch. This kit includes back cap, collets,
collect bodies, nozzles and tungsten.
Order KP508
for PTA-17 torches
See publication E12.150 for parts kits breakdown.
Cut Length Consumables -
TIG welding filler metals
are available for welding stainless steel, mild steel, alu-
minum and copper alloys. See publication C9.10.
