background image

[3]

www.lincolnelectric.com

Recommended Options

Digital Meter Kit

Displays amps and volts.

Order K1482-1.

Air Filter Kit

Mounts on the front of the
machine and uses clean-
able, all metal air filters.

Order K1486-1.

Dual Process Switch

Mounts on front of machine
and provides polarity
change or electrical isola-
tion. Great for arc gouging
applications and where two
separate feeders require 
different output polarity or
inductance settings.

Order K1528-1.

Paralleling Kit

Permits paralleling of two
DC-655’s for welding cur-
rents of up to 1300 amps,
100% duty cycle. The 
“master” DC-655 controls
both paralleled machines.

Order K1611-1.

Remote Output Control

Provides 25 ft. or 100 ft.
(7.6m or 30m) of remote
output control (6 pin plug
connection). Requires K864
Control Cable Adapter.
For 25 ft. (7.6m),

Order K857

For 100 ft. (30m),

Order K857-1.

Remote Control
Adapter

Y connection adapter for
connecting K857 Remote
Voltage Control (6 pin plug
connection) and wire feeder
input cable (14 pin plug con-
nection) to DC-655 14 pin
receptacle.

Order K864.

Deluxe Adjustable Gas
Regulator & Hose Kit

Accommodates CO

2

, Argon

or Argon-blend gas cylin-
ders. Includes a cylinder
pressure gauge, dual scale
flow gauge and 4.3 ft.
(1.3m) gas hose.

Order K586-1.

Undercarriage

Platform undercarriage with
mountings for two gas cylin-
ders at rear of welder.

Order K842.

Accessory Kit

For stick welding. Includes
35 ft. (10.7m) 2/0 electrode
cable with lug, 30 ft. (9.1m)
2/0 work cable with lugs,
headshield, filter plate,
cover plate, work clamp 
and electrode holder. 400
amp capacity.

Order K704.

TIG Module

Supplies high frequency for
superior starting, contactor
control, remote control
capability and a gas valve
for TIG welding.

Order K930-2.

Docking Kit

Provides a means to “dock”
the TIG Module on top of a
flat-roofed power source, or
any other flat surface meas-
uring at least 10 x 15 in.
(254 x 381mm). It includes a
latch and provisions for a
user-supplied padlock to
lock the TIG Module in
place.

Order K939-1.

Hand Amptrol™

Varies current for making
critical TIG welds. Fastens
to the torch for convenient
thumb control. Comes with a
25 ft. (7.6m) cable. Fully
extend the slide forward to
achieve maximum current.
Returning to the start posi-
tion finishes the weld and
starts the afterflow cycle on
systems so equipped.

Order K963-1

(For smaller handle 9, 17 or
20 series torches).

Order K963-2

(For larger handle 26 or 18
series torches).

Foot Amptrol™

Varies current for making
critical TIG welds. Depress
pedal to increase current.
Depressing pedal fully
achieves maximum set 
current. Fully raising the
pedal finishes the weld 
and starts the afterflow
cycle on systems so
equipped. Includes 25 ft.
(7.6m) control cable.

Order K870.

Amptrol Adapter Kit

Adapts Amptrol’s 6-pin 
MS-type plug connection to
terminal strip on power
source.

Order K843.

Water Valve

For use with TIG Module.
Shuts off water flow when
the arc is extinguished when
using Magnum

®

water-

cooled TIG torches.

Order K844-1.

TIG Control Cable
Extension

Allows the TIG Module to 
be operated at up to 45 ft.
(13.7m) from power source.
Connects between the 2 ft.
(0.6m) control cable and the
TIG Module. 45 ft.

Order K937-45.

Summary of Contents for IDEALARC DC-655

Page 1: ...and CC CV Subarc or CV MIG mode selection Low profile case allows stacking machines up to three high to conserve floor space Stacking not recommended when using undercarriage Electronic and thermal protection from current overload and excessive temperatures Function lights built into the printed circuit boards speed diagnosis MULTI PROCESS WELDERS Description 650 Amp DC Multi Process Welding Power...

Page 2: ...Connector Kit K613 7 Weld Power Cable 10 ft K1842 10 GC 500 Work Clamp K910 2 Undercarriage twin cylinder K842 Gas Regulator and Hose Kit K586 1 Typical MIG and flux cored gas shielded welding systems NOTE Systems do not include shielding gas Sold separately Recessed front panel protects operating controls from damage Both 14 pin MS style cable connection and terminal strip access for remote contr...

Page 3: ...d filter plate cover plate work clamp and electrode holder 400 amp capacity Order K704 TIG Module Supplies high frequency for superior starting contactor control remote control capability and a gas valve for TIG welding Order K930 2 Docking Kit Provides a means to dock the TIG Module on top of a flat roofed power source or any other flat surface meas uring at least 10 x 15 in 254 x 381mm It includ...

Page 4: ... DC 655 230 460 575 3 60 K1609 2 DC 655 460 3 60 K1609 4 DC 655 230 400 3 50 60 K1610 1 Recommended General Options Digital Meter Kit K1482 1 Air Filter Kit cannot be used with K1528 1 K1486 1 Dual Process Switch cannot be used with K1486 1 K1528 1 Paralleling Kit K1611 1 Remote Output Control MS Connector use with K864 for 25 ft 7 6m K857 for 100 ft 30m K857 1 Remote Control Adapter K864 Deluxe A...

Reviews: