English
English
11
Case Front Control Desciptions for
Flextec™ 450
(see Figure #5)
1. Power Switch
2. Voltage Display Meter
3. Amperage Display Meter
4. Thermal LED
5. Output Control Dial
6. Weld Process Selector Switch
7. Hot Start Toggle Switch
8. Output
Control
Local/Remote Toggle Switch
9. Arc Control Dia
10. Weld Terminals On/Remote toggle selector switch
11. Wire feeder voltmeter polarity selection toggle
switch
12. Circuit breaker reset button for the 14-pin wire
feeder connector
13. 14-pin wire feeder circular connector
14. 6-pin remote circular connector
15. Positive and negative welding output studs
16. VRD™ (Voltage Reduction Device) Indicator lights
Figure #5:Flextec™450
Case Back Control Desciptions for
Flextec™ 650
(see Figure #6)
1. Input Power Cord Access Hole
2.
Access Panel
– Allows access dor connecting input
power and configuring the machine.
3.
Input Power Reconnect
– Configures the machine
for the input supply voltage.
4.
OPTION
– GFCI protection for the 115V auxiliary
output.
5.
115 volt
, 15 amp auxiliary output duplex with
protective environmental cover.
6.
15 Amp Circuit Breaker
for the 115V auxiliary
power.
Figure #6: Flextec™ 650
Case Back Control Desciptions for
Flextec 450
(see Figure #7)
1. Input Power Cord Access Hole
Figure #7: Flextec™ 450