B-2
OPERATION
B-2
• Inspect the product and check it for damage. Verify
the functioning of the safety features.
• Check the working environment. Do not allow unau-
thorized persons to enter the working environment.
• Protect the product against water and humidity.
• Use common sense. Stay alert and keep your atten-
tion to your work. Do not use the product when you
are under the influence of drugs, alcohol or medi-
cine.
• Make sure the room is always sufficiently ventilated;
this applies especially to confined spaces.
• Never install the product in front of entrances and
exits which must be used for emergency services.
• Make sure that the workshop in the vicinity of the
product, contains sufficient approved fire extin-
guishers.
• Maintenance should only be performed by autho-
rized, qualified and trained persons (skilled) using
appropriate work practices.
• Always wear face mask and gloves during filter
exchange / cleaning.
DOWNFLEX 200/400
Never use the product for:
• Oxy-fuel cutting.
• Arc-air gouging.
• Oil mist.
• Paint mist.
• Heavy oil mist in welding fume.
• Extraction of hot gases (more than 45°C/113°F
continuously).
• Grinding aluminum and magnesium.
• Flame spraying.
• Extraction of cement, saw dust, wood dust etc.
• Explosive environments or explosive sub-
stances/ gases.
------------------------------------------------------------------------
WARNING
In case of welding and plasma cutting, the use of
a backdraft kit is required.
------------------------------------------------------------------------
WARNING
Moving parts (fan) may cause
injury. After switching off the fan,
wait at least 20 seconds before
opening the door(s) to carry out ser-
vice, maintenance or repair jobs.
•
Industrial vacuum cleaner used during service
and maintenance should meet OSHA guidelines
for Cr6 housekeeping.
• Always use the downdraft table with prefilters,
filter cartridges and dust drawers properly
installed.
------------------------------------------------------------------------
WARNING
Summary of Contents for DOWNFLEX 200
Page 44: ...NOTES DOWNFLEX 200 400...
Page 45: ...NOTES DOWNFLEX 200 400...