D-9
MAINTENANCE
EAGLE™ 10,000 PLUS
CAUTION
E. Spark plug replacement
2) Unhook retaining clips and remove cover.
4) Check condition of rubber seal and replace if necessary.
brushes or other hard cleaning tools.
1)
Recommended spark plug
: F6RTC.
5) Start the engine and check for oil leaks.
7) Reinstall air cleaner cover:
a) Lean the cover against the base. Push the cover forward to
position the knobs into the slots.
b) Press the cover and secure the retaining clips.
Operating engine with loose or damaged air cleaner
components could cause engine wear and failure, and void
your warranty.
Paper element cannot be blown out with compressed air.
may damage the engine.
WARNING
Do not use gasoline or cleaning agent with low ignition
DANGER
2) Non-recommended spark plugs may cause damage to the
engine.
3) Remove the dirt from the spark plug cap and bottom.
4) Remove the spark plug cap.
5) Use a socket wrench to loose and remove the spark plug.
6) lnspect the spark plug and spark plug washer. If it is damaged
or worn, replace with new one. Clean the spark plug with wire
brush if reused.
7) Check spark plug gap. Carefully bend side electrode to adjust
the gap if necessary.
SPARK PLUG GAP REQUIREMENTS
:
0.6mm - 0.8mm.
8) Carefully thread the plug into the engine by hand.
9) After the spark plug is seated, use a wrench to tighten.
SPARK PLUG TIGHTENING TORQUE LEVEL
: 177 - 220 in-lb,
20-25 Nm.
10) Attach the spark plug wire to the plug.
4) Add oil to the engine and confirm the dipstick is in place.
