Lincat WMB5FX, Installation, Operating And Servicing Instructions, Page: 6 / 12

IS 745 ECN 4386 Page 6 of 12
4
6
4
353 218
A DISPLAY
B DISPENSE BUTTON
C OVERFLO W RESET
D WATER FILTER
E DRAIN VALVE
F CONDENSATE/O VERFLO W
G WATER INLET CONNEC TION
H ELECTRICAL CO NNECT ION
29 50
5
4
2
8
1
5
2
49
74
D
E
9
6
F
G
H
A
B
C
37
OPERATING INSTRUCTIONS
Only qualified or trained personnel should use this appliance.
First Use
Switch on both mains water and electricity supplies and leave the boiler for 13 mins
to fill completely. Unit will display
READY when set temperature is reached.
New filters have a small amount of loose, harmless, carbon particles. Drain off
approximately 3 litres of water when first setting up or replacing filter.
Regular operation
The appliance starts automatically shortly after the electrical supply is turned on,
filling with water and heating.
The unit will display ‘
WAIT
’ whilst it fills and heats. It will display ‘
READY ' when
water can be drawn off.
To ensure that water is always hot, only small quantities are added constantly
during the heating cycle. The appliance is designed to be left on permanently, only
to be turned off for descaling or maintenance.
Fig. 2