IS554 ECN3869
6
2.6. COMMISSIONING
2.6.1. OPERATION
Turn on the power supply at the fan speed control. Run the fan through the range of the controller. If
operating over gas appliances, test for the lowest fan setting prior to interlock activation.
Check the lights by operating the relevant light switch. These are not dimmable lights. Do not connect to
a dimmer switch.
2.6.2. SHUTTING DOWN THE APPLIANCE
Turn off the Smartvent at the fan speed controller and light switch. This will also trip the interlock (if a
gas installation) if the gas supply has not already been isolated.
Ensure that the person responsible understands how to safely operate, clean and shutdown the
appliance.
Note: This manual must be kept in a safe and accessible place for future reference.
SECTION 3 – USER INSTRUCTIONS
3.1. PREPARATION
Before using the appliance for the first time, ensure all protective plastic has been removed and baffle
filters are in place.
3.2.1. OPERATION
Switch on the fan speed controller and energise the gas interlock. You are now ready to operate. Ensure
the installer has advised you the lowest setting to safely operate the SmartVent without nuisance
activation of the gas interlock.
3.2.2. SHUTTING DOWN THE APPLIANCE
Turn off the SmartVent at the fan speed controller and light switch. This will also trip the interlock (if a
gas installation).
Warning: After operation, some parts of the appliance may remain hot for a period of time if above
appliance flues. Please take care to avoid accidental burns.
3.3. CLEANING
Ensure the unit is isolated from the mains supply before commencing cleaning.
Disconnect appliances under the SmartVent where possible and move away for ease of access.
Remove the baffle filters and clean separately with a mild detergent and water.
Remove the grease drawers, empty and clean separately with a mild detergent and water.
Wipe off any food vapour residue on the interior face of the SmartVent and wash down with a mild
detergent and water. Rinse to ensure that all traces of detergent have been removed.
Do not use abrasive cleaners or any containing chlorine.
Do not use a water jet to clean the appliance.