IS 215 ECN 4221
Page 5 of 9
Power Ratings
Model
kW
Supply 1N~+E
Supply 3N~+E
GS3, GS3C
2.0
8.7
N/A
GS4, GS4C
2.7
11.7
N/A
GS6, GS6C
3.0
13.0
N/A
GS6/T, GS6C/T, GS6/TR,
GS6/TFR
4.0
18.0
L1 9 L2 9 L3 N/A
GS65
4.5
19.6
N/A
GS7, GS7C, GS7/R
6.0
26.0
L1 13 L2 13 L3 N/A
GS9
8.6
37.0
L1 12 L2 12 L3 13
Models of 3kW and less are supplied with a fitted plug and lead. Models over 3kW
must be installed by a qualified electrician.
OPERATING INSTRUCTIONS
Only qualified or trained personnel should use this appliance.
Before using the appliance for the first time, wipe the protective oil off the griddle
plate and wash it down with mild detergent solution.
Please note: It is important not to leave the steel plate surface uncoated for any
length of time. Once these steps have been followed, the plate must be coated with
a thin film of cooking oil as instructed below in the
‘Cleaning’ section.
Connect to the power supply and switch on
– the green neon indicates power to the
appliance.
The temperature in each half of twin zone models may be controlled separately.
Turn the control knobs to the required setting
– the amber neon illuminates.
The griddle is ready to use when the amber neon extinguishes. The amber neon
will then operate as the element cycles.
Regularly check the fat drawer. Do not let it overflow.
CLEANING
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Clean outer panels with warm water and mild detergent, do not use abrasive
materials. Dry with a soft cloth.
