IS280 ECN2841
Page 7
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
Connect the unit to the electricity supply.
Ensure that the cable (4) is in good
condition.
Switch the unit on (2) and turn the
temperature controller (1) to the desired
setting. Wait for about 20 minutes for the
unit to heat up. Place the dishes/
Gastronorm containers with hot food
onto the aluminium hob surface.
Switch on the Infra-red lamp (3).
CLEANING
Disconnect the product from the electricity supply and ensure that it
is cool to touch, before starting to clean. Use a mild detergent in hot
water and a soft cloth. Do not use abrasive creams or scourers. Use
a suitable polish on the exterior metal surfaces by spraying onto the cloth (not
directly onto the steel).
MAINTENANCE
Regular cleaning of the unit is recommended. No regular
maintenance is required, but it may be necessary to replace a light
tube.
Before operation, replace damaged switches, feet, or control knobs.
The Infra-red lamps on LD units are user replaceable.
Disconnect the unit from the electricity supply and ensure the unit is
cool to touch.
The lamp is a “bayonet” type fit. To remove, push the lamp carefully to one side
into the end connector (against light spring resistance) allowing the other end to
detach from its connector. Dispose of the old lamp safely. Fitting the new lamp is
the reverse of the above sequence.
NOTE
1- Temperature Controller
2- On/Off Switch
3- Infra-red Lamp Switch
4- Cable
