IS277 ECN 3850
Page 7
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
Connect the unit to the electricity
supply. Switch the unit on (green
switch), insert empty Gastronorm
containers (100mm deep maximum)
with lids and wait until the
temperature display shows -2
O
C. At
this point introduce your chilled food
product. It is good working practice
to periodically monitor the food
temperature and to use lids on GN containers. The unit is not designed for long-
term storage.
The temperature display relates to the temperature measured in the
well of the unit, not the temperature of the food product.
DEFROSTING
The unit is not designed to defrost automatically. For best performance you
should carry out the following defrosting instructions daily. Switch the unit off,
disconnect from the electricity supply and remove the containers. After 30
minutes some water may form in the well. Dry with a cloth.
CLEANING
Disconnect the product from the electricity supply before starting to
clean. Use a mild detergent in hot water and a soft cloth. Do not use
abrasive creams or scourers. Use a suitable polish on the exterior metal
surfaces by spraying onto the cloth (not directly onto the steel).
MAINTENANCE
It is recommended that a qualified refrigeration service engineer
checks this unit annually. It should not be necessary to alter the
digital controller, as it has been factory set.
For best performance you should clean the filter weekly (see Picture 1).
Slide out; use a soft brush to remove particles and replace. Do not
place the filter in water.
NOTE
NOTE
1
2
3
4
1. Temperature Display
2. On/Off Switch
3. Cable
4. Filter Position
1
