IS285 ECN2843
Page 9
CLEANING AND MAINTENANCE
CLEANING
Disconnect the unit from the electricity supply and ensure it is cool to
touch before starting to clean. Use a mild detergent in hot water and a
soft cloth. Do not use abrasive creams or scourers.
Slide the doors to the middle position; lift up and out of the runners to remove.
Remove the shelf and any food product and containers.
Remove the side glass panels by unscrewing the black plastic fastener and
carefully lift the glass from the channel.
The shelves and water bath may be washed in a dishwasher.
Always remove the shelf before removing the side glass.
MAINTENANCE
Regular cleaning of the unit is recommended. No regular maintenance is
required, but it may be necessary to replace a light tube.
REPLACING THE LIGHT TUBE
Disconnect the unit from the electricity supply and ensure the unit is
cool to touch.
Remove doors. Unclip the end caps from the light unit. Remove the diffuser
from its clips. To remove the tube, carefully rotate it 90
o
and slowly pull down
until it is released. It is recommended that the starter (a round cylinder located
at one end of the tube) is also replaced at the same time. To remove the starter,
rotate it anticlockwise. Fitting the new tube is the reverse of the above
sequence.
To remove the gastronorms in a flat state on the SCH785 model it will be
necessary to remove the sliding doors. (See above for details).
NOTE
