IS 728 ECN 4470
Page 5 of 10
Means of isolation with at least 3mm contact separation in all poles must be
incorporated into the fixed wiring of this appliance.
The fixed wiring insulation must be protected by insulated sleeving having a
temperature rating of at least 60 Deg C.
Supply cords shall be oil resistant, sheathed flexible cable not lighter than ordinary
polychloroprene or equivalent elastomer sheathed cord (code 60245 IEC 57)
Install this appliance on a level surface ensuring all vents are unobstructed. Any
partitions, walls or furniture must be of non-combustible material. Minimum
distances A 100mm B 1000mm
– see Fig 1.
Ensure there is a space of at least (1000 mm) between the working surface and any
ceiling.
Install this appliance beneath an extraction canopy.
Connection of the supply cable is behind the access panel on the rear of the
appliance. Remove the access panel and fit a suitable cable through the cable
gland to the terminal block.
Anti-slip washers are provided to create a slip free pocket for the front feet, so
preventing movement during operation. Ensure the work surface is structurally safe
before installing the washers.
OPERATING INSTRUCTIONS
Only qualified or trained personnel should use this appliance.
This appliance should not be operated unattended.
Fig 2
A Splashback
B Element lock pin
C Control knob
D Green neon
E Amber neon
F Drain tube
G Fat collection drawer
