IS 314 ECN 3607
Page 5 of 7
OPERATING INSTRUCTIONS
Only qualified or trained personnel should use this appliance.
Connect the appliance to an electricity supply and switch on
– the switch and
interior light illuminate.
Turn the control knob to the desired setting
– the amber neon illuminates and
extinguishes when temperature is reached.
The amber neon will periodically illuminate as the element cycles.
This appliance is fitted with a safety thermostat, which will cut power to the
appliance under fault conditions. If the switch illuminates but the appliance does
not heat up, the safety thermostat may need re-setting. Push the red button on the
rear panel (Fig 2
– A). This re-set cannot be activated until the appliance is cool.
Fig 2
CLEANING
Do not use a water jet or steam cleaner, and do not immerse this appliance.
