IS150 ECN 2038
2.3 COMMISSIONING
1.
Slot Selector.
2.
Timer Control.
3.
Toast Lifting Lever.
4.
Crumb Tray.
Figure 1.
SWITCHING ON
1.
Set the timer knob in the off position (knob vertical).
2.
Plug in the toaster and switch on the socket.
3.
Set the slot selector to the maximum number of slots.
4.
Turn the timer control knob clockwise to four minutes.
5.
Run the unit through two four minute timed cycles, without product in the slots, in order to remove
any surface contaminants from the elements.
2.4 USER INSTRUCTION
Ensure that the person responsible understands how to safely operate, clean and shut down this appliance
and is made aware of the position of the isolating switch.
Note: This manual must be kept in a safe and accessible place for future reference.
SECTION 3 OPERATION
1.
Set the timer knob in the off position (knob vertical).
2.
Plug in the toaster and switch on the socket.
3.
Select the number of slots required. The slots are ordered with slot 1 on the left hand side of the unit.
4.
With the lift lever in the down position, load the bread and raise the lever to lower the bread.
5.
Using the timer control select the toasting time required. The markings are 1 to 4 minutes. Usually a
setting of 2 minutes will give satisfactory results. This time will vary dependant on the freshness, the
type of bread used and the level of browning required.
6.
At the end of the set time the elements will automatically turn off.
7.
To remove the toast from the slots lower the toast lift lever.