cont. operation
5.3.1 Start cooking
(please check control panel on page 3)
5.3.2 Finish cooking
If the display flashes alternately with the
heat setting
Place a suitable pan on the cooking zone that you wish to use. Make sure the
bottom of the pan and the surface of the cooking zone are clean and dry.
To turn on one or more cooking zone, place a compatible pot or pan on the
desired cooking zone. Touch the cooking zone selector key
(corresponding to the chosen cooking zone), the power
display will show a “
-
”. Touch the chosen cooking zone key within 5 seconds.
Press the “ ”key, it will make a “beep”
once, and it will turn off. The unit is
now on the standby mode.
Beware of hot surfaces
will show which cooking zone is hot to
touch. It will disappear when the surface has
cooled down to a safe temperature. It can
also be used as an energy saving indicator
as you can use the cooking zone that is still
hot.
This means that:
You have not place a pan on the correct
cooking zone or, the pan you are using is not suitable for
the induction cooking or, the pan is too small or not properly
centered on the cooking zone.
No heating takes place unless there is a suitable
pan on the cooking zone.
5.3.3 Using the Boost function
5.3.4 Locking the controls
Activate the boost function
To lock the controls
To unlock the control
Touching the “ ” key will show on the display as a
“ ”boosting the heating power to the highest level.
Boost is the highest power level, designed
for quickly heating or boiling larger
quantities. Boost will operate for maximum of 5 minutes.
After 5 minutes, it will automatically revert to power level 9.
You can lock the controls to prevent unintended use for
example children accidentally turning the cooking zones on.
When the controls are locked, all the controls except the
ON/ OFF control are disabled.
Touch or hold the “ ” key for 2 seconds to activate the
function. The unit will make a “beep” sound and the
indicator light will turn on above the “ ” key. The
controls are now locked.
While in lock mode, Touch or hold the ” “key for two
seconds to deactivate the function. The indicator light will
turn off.
8
5.3 How to use your induction cooktop
While on the standby mode, touch the main power “ ”key, the induction cooktop will make a
“beeping sound” once indicating that it is ready to use.
If only the indicator light above the “ ” key is lit up, the cooking zone key is ON, or
Locked key are not chosen within 30 seconds, the unit will automatically return to standby mode.
Touch the key of the cooking zone you use, the digital
display will blink, press “ ” key to adjust “ - ”, the
cooktop will switch off.
5.3.4 Locking the controls
To lock the controls
To unlock the control
You can lock the controls to prevent unintended use for
example children accidentally turning the cooking zones on.
When the controls are locked, all the controls except the
ON/ OFF control are disabled.
Touch or hold the “ ” key for 2 seconds to activate the
function. The unit will make a “beep” sound and the
indicator light will turn on above the “ ” key. The
controls are now locked.
While in lock mode, Touch or hold the ” “key for two
seconds to deactivate the function. The indicator light will
turn off.
When the cooktop is in the lock mode, all the controls are
disable are disabled except the ON/OFF, you can
always turn the induction cooktop off with the ON/OFF
control in an emergency, but you shall unlock the cooktop
first in the next operation
