9
www.linarie.c om.au
11. TROUBLESHOOTING
Status
Reason and solution
Too high noise.
If you find any abnormality during operation, immediately stop the operation, remove the power line plug,
and check the machine according to the following instructions. If necessary, contact the after-sales service
center of this company.
The fridge is not level.
The power supply is not switched on.
The computer board is damaged.
The compressor is provided with a
protection mode
The door is opened too frequently or
the door is opened for too long time.
The external environment is highly
humid.
The illumination lamp is damaged.
Check whether the power supply is
switched on.
The door seal may be hardened or
deformed due to the low temperature
inside the fridge after operation for a
period of time.
Use the hot air of the hair dryer to bake
the deformed surface or use the hot
towel to cover the deformed surface,
and close door and press it tightly after
the door seal is softened.
Notify the manufacturer for
replacement of the lamp.
Check the power supply.
The fridge temperature is set too low.
Level the fridge, for the unleveled fridge
may produce noise during operation.
Switch on the power supply.
Notify the manufacturer for repair.
The operation interval of the
compressor is 5 minutes.
Do not open the door for too long time,
nor open or close the door too
frequently.
Dry using a piece of dry cloth.
Set a proper temperature.
The fridge doesn't
work.
The fridge door
surface is dewed.
The illumination lamp
is not lit.
The door is not
properly sealed and
there is a leakage
of cool air
- If the temperature in the summer is too high, the compressor will work for
long time. This is normal.
- If the fridge is not cool enough, please check against the following items:
- If the fridge door is not properly sealed or the door is opened too frequently,
close the door tightly, and open the door at a lower frequency. Do not place too
many drinks in the fridge, and maintain a certain space between foods.
- If the temperature inside the cooler reaches too low required temperature,
check the temperature setup, and set the temperature at a higher level.
The compressor keeps
operating for long
time.
- Adjust the refrigerating level.
- The fridge is exposed to sunshine or any heat source is located in its
immediate area.
- Any hot drink is placed into the fridge.
- The drinks in the fridge are crowded to impair the cool air circulation.
- The fridge door is frequently opened or is not properly closed.
The refrigerating effect
of the fridge is poor.
- The new fridge may give off the smell of the foaming agent or plastic.
That’s normal, and such smell will disappear slowly in future.
Check whether there is any spoiled drink inside the fridge.
Any odorant drink shall be tightly sealed using the plastic bag.
The fridge shall be cleaned on a regular basis.
There is any odor in
the fridge.
- The sound is generated from the flowing of the refrigerant inside the circulating
pipeline of the refrigerating system. That’s normal.
- No further treatment is required.
- This is the sound generated in the startup of electric components, such
as the relay and thermal protector, during start or stop of the fridge.
- This is caused by the mutual fine movements of various kinds of materials due
to the inconsistent thermal expansion and contraction arising out of abrupt
changes of the fridge inside temperature when the fridge is being started
or stopped.
The fridge produces
the liquid flowing
sound.
The fridge produces
snapping sound in
operation.
