Page 16 of 24
3. Pairing another device later
If you wish to connect another control or a smartphone/tablet to the LA18 later, just disconnect, wait 2 minutes
and connect the LA18 to the mains to get it in pairing mode again. See instructions 1 or 2 above to find out how
to pair the device, you want.
The LA18 will be in pairing mode every time the system has been out of power and connects again. To get the system
out of pairing mode – simply press any button on an already paired device.
If you wanted to pair a device, but did not make it in the 3 minutes pairing mode, please disconnect the LA18 from
the mains. Connect the LA18 to the mains again – now the LA18 will be in pairing mode for 3 minutes.
LA18IC Standard system
A LA18 Standard system consists of a LA18IC Standard Master and a LA18 Standard Slave. The two actuators are connected with
a motor cable. The system is connected to the mains via the SMPS and 2-poled DC cable.
LA18 Standard Master
HC10
SMPS
LA18 Standard Slave
LA18 Standard system
Summary of Contents for Homeline LA18
Page 2: ...Page 2 of 24...
