Page 16 of 23
3. Pairing another device later
If you wish to connect another control or a smartphone/tablet to the KA20IC2 later, just disconnect, wait 2 minutes
and connect the KA20IC to the mains to get it in pairing mode again. See instructions 1 or 2 above to find out
how to pair the device, you want.
The KA20IC will be in pairing mode every time the system has been out of power and connects again. To get the
system out of pairing mode – simply press any button on an already paired device.
If you wanted to pair a device, but did not make it in the 3 minutes pairing mode, please disconnect the KA20IC2 from
the mains. Connect the KA20IC2 to the mains again – now the KA20IC2 will be in pairing mode for 3 minutes.
KA20IC2 system
You can expand the system by adding a KA20 to the KA20IC2 . The KA20IC will act as the master of the system and the KA20 will
be connected with a motor cable. The system is connected to the mains via the SMPS and 2-poled DC cable.
KA20
KA20IC
HC
SMPS
