Linak DESKLINE DESK FRAME 2, User Manual, Page: 19 / 25

Page 19 of 24
For disassembling the DF2, use a disassembly tool (ordering code SA1023W1241).
The disassembly tool has ridges on one side.
Disassembling DF2
1. Drive desk to its minimum height so columns are completely retracted.
2. Disconnect from mains supply.
3. Turn table upside down.
4. Disconnect, unscrew and remove desk panel.
5. Unscrew and remove feet.
6. Place disassembly tool on beam with the ridges facing towards the cantilever.
7. Press straight down to loosen cantilever and make pawl release column.
8. At the same time press disassembly tool down and tilt column to remove from beam.
9. Unscrew DF2 beam from tabletop.
10. Twist cantilever slightly to release it from beam.
11. Disassemble rest of system.
Disassembly
A disassembling instruction video is available here.
Figure 6 Disassembly tool