background image

0190045 Page 3 of 4

Packaging, Transportation, and Storage

The BA001 is a Lithium Ion battery and must be packed and transported 

according to applicable regulations. This must also be considered when 

repacking and in case of return shipment. Note: Damaged batteries cannot 

be transported.

Packaging

The BA001 boxes are to be packed according to UN3480 PI: 965 Section II. 

From the factory, the battery is packed in a primary and a secondary packag-

ing. The primary packaging is a single piece; the secondary packaging con-

tains 8 pieces. The primary and secondary packaging is labelled with the label 

shown (example) indicating that the package contains Lithium Ion batteries.

•  Before unpacking, please inspect the packaging for damages to avoid 

any injuries.

•  Damaged batteries must be disposed according to the material safety 

data sheet of the BA001 and local regulations.

•  The BA001 can be packed with other products/components, but it must 

remain in the primary packaging and the new secondary packaging 

must be labelled with the label shown above. The label must be placed 

visible at the secondary box/overpack.

General Battery Safety Notes

•  Only the CBD6S and the SMPS006 can be used for charging the 

BA001 battery pack.

•  In connection with charging/discharging notice that the charger/battery 

can become warm. Keep away inflammable objects.

•  Keep the charger and the battery away from children. The battery must 

be stored on a non-flammable base.

•  In case of damaged batteries, the battery must be removed and 

replaced immediately to avoid danger and malfunction.

• 

The BA001 must not be exposed to heat or fire. Avoid any contact with 

water and direct sunlight.

•  Do not cover neither the charger nor the BA001 during charging.
•  The surface where the battery is mounted must be suitable and 

correspond to the demands for e.g. weight and temperature.

•  In case of suspicious smoke, do not use the battery.
•  The capacity of the BA001 will deteriorate over time.  The deterioration 

will depend on use and temperature. Under ideal conditions, the 

discharge capacity is at least 70% after 500 cycles.

•  A BA001 with below 25% capacity must not be stored. The battery must 

be recharged before storage (25% equals to 1 LED light bar).

•  For best performance, perform a full battery charge every time.

Transportation

When transporting the BA001 (a Lithium Ion battery) the current regula-

tions must be observed. This applies to ADR (road transportation), IATA 

(air shipping) and IMDG (sea freight). When transporting, pay attention to 

handling and minimise the risk of e.g. dropping the batteries and thereby 

prevent malfunction and injuries.

Storage

The batteries must be stored in an applicable storage room avoiding direct 

sunlight and high temperatures.

Storage temperature range:

Period:

1 year

6 months

1 month

Temperature range:

0°C to +25°C

0°C to +50°C

0°C to +60°C

The recommended storage conditions are:

Temperature:

Relative humidity:

Air pressure:

Altitude:

Recharging during storage

0°C to +45°C

45 - 85% RH

700 - 1060 hPa

< 2000 m

Recharge the battery 6 months at the latest 

after production date stated on the label.

This BA001 battery is developed for furniture and for indoor use. Do 

not use it in industrial kitchens or in other environments that have to be 

cleaned with aggressive detergents.

Warranty

There is a 12 months’ warranty on the BA001 battery against manu-

facturing faults from the production date of the individual products (see 

label).  LINAK A/S’ warranty is only valid in so far as the equipment has 

been used and maintained correctly and has not been tampered with. 

Furthermore, the system must not be exposed to violent treatment. In 

the event of this, the warranty will be ineffective/invalid. A loss of capac-

ity over time must be expected. For further details, please see LINAK 

A/S ordinary conditions of sale.

Maintenance

Clean dust and dirt on the outside of the BA001 at appropriate intervals 

and inspect them for damage and breaks. Inspect the connections, cables, 

and plugs and check for correct functioning as well as fixing points.

Safety

Reviews: