background image

3

© Limitless Innovations, Inc.

SAFETY PRECAUTIONS

• 

Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.

• 

Wear complete eye protection and clothing protection. Avoid touching eyes while working 
near battery.

• 

If battery acid contacts skin or clothing, wash immediately with soap and water. If acid 
enters eye, immediately flood eye with running cold water for at least 10 minutes and get 
medical attention immediately.

• 

NEVER

 smoke or allow a spark or flame in vicinity of battery or engine.

• 

Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or 
short-circuit battery or other electrical part that may cause explosion.

• 

When charging the internal battery, work in a well ventilated area and do not restrict 
ventilation in any way.

• 

Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. 
Liquid ejected from the battery may cause irritation or burns.

• 

Do 

NOT

 expose a power pack to fire or excessive temperature. Exposure to fire or 

temperature above 130°C may cause explosion.

• 

Have servicing performed by a qualified repair person using only identical replacement 
parts. This will ensure that the safety of the JumpSmart is maintained.

• 

Attach output cables to a battery and chassis as. 

NEVER

 allow the output clamps to touch 

one another.

PLEASE SAVE THESE INSTRUCTIONS

Safety Information   

cont’d

Summary of Contents for JumpSmart

































Reviews: