© Limitless Innovations, Inc.
8
Operation Instructions
Cont.
PHONESTATION VENT CLIP
1. Place the Socket Cap on the Ball Joint
Socket located on the back side of the
PhoneStation Mount and turn clockwise.
Do
NOT
tighten the Socket Cap at this time.
2. Insert the Ball Joint of the PhoneStation
Vent Clip into the Ball Joint Socket of the
PhoneStation Mount.
3. Turn the Socket Cap clockwise until snug,
but do
NOT
fully tighten at this time. The
PhoneStation Mount should be able to
rotate with applied pressure only.
4. With the Locking Lever in
the vertical position, slide
the PhoneStation Vent Clip
onto an air vent fin.
Summary of Contents for CHARGEHUB PHONESTATION
Page 1: ...User Manual ...
Page 2: ......