LMS7002M Quick Starter Manual for EVB7 kit
75 |
P a g e
Version: 2.2
Last modified: 29/09/2014
8
Appendix A: Test Equipment Setup
Introduction
8.1
This section lists the recommended test equipment to use with the EVB7. It also provides
detailed setup procedures for the Agilent MXG when used with EVB7. Note the set up procedure
is only required when using the analogue TX inputs of the LMS7002M. This procedure is not
required when the LMS7002M chip is driven digitally by a baseband processor.
Recommended Test Equipment
8.2
The following test equipment is recommended for the testing of EVB7. It is possible to use other
test equipment, but the alternatives may not provide all the necessary features.
N5182A MXG
o
Differential Arbitrary Waveform Generator Option 1EL
N9020A MXA DC - 6 GHz
o
NF personality
o
Phase Noise personality
o
WCDMA personality
o
LTE personality
Agilent Power Supply 5V
Agilent 384C Noise Source
o
15 dB ENR
