4
SAFETY &
CLEANING
INSTRUCTIONS
DO’s
STORAGE & TRANSPORTATION
DON’Ts
Follow all instructions.
Keep these instructions.
Heed all warnings.
Do not install near any heat sources,
do not expose the product to flames
or use near naked flame sources.
Do not use flammable solvents near or
on this product.
Only use the lubricant and
simulated blood supplied with this
product. Use of non-recommended
fluid products may weaken or
damage the simulator.
Do not use any attachments
other than those supplied by the
manufacturer.
Wear gloves at all times and remove all
jewellery items. Sharp surfaces such as
finger nails and rings can lead to damage
of silicone parts.
Clean the product with a damp soft
cloth or sponge, using only warm water
with mild detergent, after every training
session. Clean off excess lubricant from all
mother and baby surfaces.
Always ensure that the products are
properly packed and secured during
transportation and storage in order to
prevent personal injury or damage to
the product.
Do not wear any jewellery items.
Do not disassemble the product or
attempt to repair a faulty unit, please
return the product to Limbs & Things
for assessment and repair.
READ THE SAFETY INSTRUCTIONS CAREFULLY BEFORE
USING YOUR PROMPT FLEX BIRTHING SIMULATOR
Always lubricate the cervix, birth
canal and baby before each birth.
Lubricant
Gel
A poorly lubricated baby or placenta
may damage the birth canal or the cervix
as it is pushed through.
