4
CHAIN TENSION
Using a 9/16” wrench, loosen 2 nuts holding
the black chain guard cover with yellow
warning sticker.
Using a 9/16” wrench, tighten chain screw
bolt “in” to tighten chain. To loosen chain,
unscrew bolt “out.” Chain tension should
be the same as any hand held chainsaw.
Do not over tighten. Over tightening will cause
chain to stretch, cause additional wear and
tear on the sprocket and additional strain
on the motor.
Re-tighten guard cover when
adjustment is complete.
Correct chain tension.
Correct installation and setting
of chain tensioner.
