LILYGO T3 V1.6.1, User Manual

Page: 14 / 18

!
6. SSC Command Reference
7. SSC Command Reference
Here lists some common Wi-Fi commands for you to test the module.
7.1. op
Description
op commands are used to set and query the Wi-Fi mode of the system.
Example
op -Q
op -S -o wmode
Parameter
7.2. sta
Description
sta commands are used to scan the STA network interface, connect or disconnect AP, and
query the connecting status of STA network interface.
Example
sta -S [-s ssid] [-b bssid] [-n channel] [-h]
sta -Q
sta -C [-s ssid] [-p password]
sta -D
Parameter
Table 6-1. op Command Parameter
Parameter Description
-Q Query Wi-Fi mode.
-S Set Wi-Fi mode.
wmode
There are 3 Wi-Fi modes:
•
mode = 1: STA mode
•
mode = 2: AP mode
•
mode = 3: STA+AP mode
Table 6-2. sta Command Parameter
Parameter Description
-S scan Scan Access Points.
Xinyuan 9 /1 3 202 2 . 07