Lilliput SG-12G, User Manual

Page: 7 / 30

4
3.1.1 Switch output pattern

Press the direction keys to choose the pattern, then press OK key to
conform.

Move the mouse to the pattern, then double left click or right click to select
apply.
3.1.2 Add the pattern (Built-in pattern supports customization.)

The device supports to add the pattern via USB interface. Plug the USB
flash disk, then click the "add new" icon on the right corner of the screen to
add the pattern. To add the built-in pattern, please contact with the
Service.

Support to create User Color Picture base on RGB and YCbCr

Click "Add New"->"Custom" by using mouse, or press the Down key to go
to the bottom of Pattern interface, then press Left or Right Keys to activate
the setting interface.

Select Color Space to choose RGB or YCbCr and the relevant parameters
according to the requirement. Click or press "Add" to add this new pattern
to the system.
3.1.3 Delete the pattern (Built-in pattern can't be deleted.)

Press the direction keys to choose the pattern, press Exit key, then select
OK key on the pop-up window to delete the pattern.

Move the mouse to the pattern, right click to select delete.