Lilliput Q7 PRO, User Manual

Page: 16 / 22

16
RGB Full YCbCr
3-2-4-2. Waveform Trans
Use this setting to choose the intensity of the Waveform Trans:
-[Off] : The background of waveform is shown at black.
-[25%]:The background of waveform is shown at 25% intensity.
-[50%]:The background of waveform is shown at 50% intensity.
3-2-4-3. Peaking
The peaking is used to aid the camera operator in obtaining the sharpest
possible picture. Select
“On” to display colored outlines around sharp areas of
the image.
3-2-4-4. Peaking Color
Use this setting to change the color of focus assist lines to Red, Green, Blue,
White, Black. Changing the color of the lines can help make them easier to see
against similar colors in displayed image.
3-2-4-5. Peaking Level
Use this setting to adjust the level of focus sensitivity. If there are plenty of
details of image with high contrast, it will display lots of focus assist lines that
may cause visual interference. So, decrease the value of peaking lever to
reduce the focus lines to see clearly. Conversely, if the image has less details
with low contrast, it should be increase the value of peaking lever to see the
focus lines clearly.
3-2-4-6. False Color
This monitor has a false color filter to aid in the setting of camera exposure. As
the camera Iris is adjusted, elements of the image will change color based on
the luminance or brightness values. This enables proper exposure to be
achieved without the use of costly, complicated external equipment.