Lilliput 629GL-70NC, User Manual, Page: 10 / 20

right, Vol-/ is to make the OSD move to left. After that press “</>”on the unit
or “ / ” on the remote controller to select other item to adjust or to select
to exit the OSD.
To adjust the OSD position in vertical direction you can select next item
and operate as follows,
-
The is to adjust the OSD position in vertical direction, press “</>”on the unit
or “ / ” on the remote controller to select this item, then push Vol+/ Vol- of
the unit or / on the remote controller and the OSD will move in vertical
direction as your operation. Push Vol+/ to make the OSD move up, push
Vol-/ is to make the OSD move down.
 OSD DURATION
The duration of OSD is adjustable. Press “</>”on the unit or “ / ” on the
remote controller to select , then you can adjust the duration of OSD by
pressing Vol+/Vol- of the unit or / on the remote controller. Push
Vol+/ to extend the period of duration, push Vol-/ to shorten the period
of duration .The duration of OSD is up to 100 seconds.
 EXIT OSD