Lilitab Wall Pro Mount
Assembly Instructions v5.0
4
ASSEMBLY INSTRUCTIONS
1.
Use the bumper plate appropriate to your
deployment to mark screw locations
on your wall.
NOTE: If you are routing the charge cable through
your wall substrate, trace the oval opening in the
center of the bumper plate to mark the area that
you will need to cutout to pass the cable through.
2.
Attach Wall Pro Mount
to bumper plate using
four (4) flathead screws
appropriate for your
wall substrate (not included).
NOTE: Ensure the bumper plate is positioned
between the mount arm and wall in the desired
orientation to prevent the unit from hitting the wall
when positioned.
3.
Place your Head Unit onto the MagDOCK
in either landscape or portrait orientation.
Turn the key to lock it in place.
WARNING:
Not locking the MagDOCK will result in
the unit falling off, possibly damaging the unit and/
or the tablet. The Lilitab Pro is designed to be
operated with the lock closed.
4.
Tilt feature.
By default the Head Unit can be
tilted by the user to suit. If you wish to disable
tilt, position your head unit at the desired
angle and tighten the bottom screw on the
neck joint with the
black L key
provided.
Refer to your Lilitab Head Unit owner’s
manual for tablet installation instructions.
