lilitab K Basic Head Unit for Samsung Tab A 10.1”
Assembly Instructions v2.0
3
ASSEMBLY INSTRUCTIONS
5.
Position the faceplate over the tablet.
Be sure to align the openings. Gently press
down around the edges—it should snap
into place.
Refer to your lilitab Mount owner’s manual
for instructions on attaching the head unit.
4.
Insert Samsung Tab A 10.1 and plug in micro
usb charge cable. Screw down white keepers
using the
4 torx screws
and
silver L key
provided.
2.
Thread the charge and sync cable
from
the top of the pole through the metal plate
located in the center of the lilitab head unit
and pull through to the front side.
3.
Attach your lilitab head unit
to the top of
pole with the four (4) head mount security
screws and silver L key that came with your
mount.
NOTE: Rotating the neck security cover 90° will make
access to the screw openings easier to access.
1.
Open the lilitab head unit
by placing it
facedown on a clean surface and squeezing
the finger latches together as shown.
Carefully lift up and the faceplate will
come off, allowing access to the inside
of the head unit.
