Lilitab Counter Pro Mount
Assembly Instructions v5.0
6
FRONT VIEW
REAR VIEW
ASSEMBLY INSTRUCTIONS
7.
Fit screw opening caps.
Once you have
adjusted the tension and degree of rotation,
insert the three
(3) Screw Opening Caps
to
conceal the three (3) screw openings on the
mount pole (two (2) on the rear and one (1)
on the front).
8.
Place your Head Unit onto the MagDOCK
in either landscape or portrait orientation.
Turn the key to lock it in place.
WARNING:
Not locking the MagDOCK will result in
the unit falling off, possibly damaging the unit and/
or the tablet. The Lilitab Pro is designed to be
operated with the lock closed.
9.
Tilt feature.
By default the Lilitab Head
Unit can be tilted by the user to suit. If
you wish to disable tilt, position your Head
Unit at the desired angle and tighten the
bottom screw on the neck joint with the
Black L Key
provided.
Refer to your Lilitab Head Unit owner’s
manual for tablet installation instructions.
6.
Set degree of rotation.
The Lilitab Counter
Basic can be configured to allow 90,° 180°
or no rotation. By default it is set to 180.°
To switch from 180° to 90° remove the lower
screw visible through the lower rear screw
opening in the mount pole using the
Black
L Key
provided, and insert it into the screw
opening on the lower front of the mount pole.
FRONT VIEW
