lilitab Counter Basic Mount
Assembly Instructions v3.0
6
ASSEMBLY INSTRUCTIONS
7.
Fit screw opening caps.
Once you have
adjusted the tension and degree of rotation,
insert the
three (3) Screw Opening Caps
to
conceal the screw openings.
8.
Insert the USB cable
through the hole in the
back of your head unit (packaged separately).
6.
Set degree of rotation.
The lilitab Counter
Basic can be configured to allow 90,° 180°
or no rotation. By default it is set to 180.°
To switch from 180° to 90° remove the lower
screw visible through the lower rear facing
opening in the tube using the
Black L Key
provided and insert it into the threaded opening
visible through the lower front opening.
FRONT VIEW
REAR VIEW
10.
Install the neck security cover.
by using
the
two (2) M3x10mm Security Cover
Screws
and
Silver L Key
.
NOTE: The security cover screws should be
oriented such that they are parallel to the long
edge of the head unit, as shown in the picture.
If they’re not, simply rotate the security cover.
9.
You will attach your head unit
using the
four (4) M3x7mm Head Mount Security
Screws
and
Silver L Key
.
NOTE: Rotating the neck security cover 90° will make
access to the screw openings easier to access.
Refer to your lilitab Head owner’s manual
for tablet installation instructions.