5. Put the power cable and video cable through the bracket rubble first and then go
through the bottom of housing (FIG.8). Plug and fix the power cable to the terminal
and plug the video cable to video output of the camera (FIG.9).
F I G . 8
L
N
Note :
When using two-cord
power cable, please
connect them to
"Live" and "Neutral".
Live
Earth
Neutral
F I G . 9
6. Next, use the provided 1/4"-20UNC screws (silver-4pcs) to fix the housing on the
bracket with hexagon screw driver (FIG.10).
F I G . 1 0
3
7. Loosen the pan and tilt adjustment screw on the bracket to turn the housing to the
desired angle and then tighten the screws (FIG. 11).
F I G . 11
L
N
Live
Earth
Neutral
