Lilin PIH - 7000, Installation & Operation Manual

Page: 33 / 45

32
NOTE
：
UNDER “AUTO FOCUS” MODE
When dip switch #5 on keyboard is set to “ON” camera will always re-focus when object
moves. When dip switch #5 of keyboard is set to “OFF” camera will automatically adjust
itself for optimum focus when camera is pointed to a target initially.
But it will not re-focus even if there is any movement unless AUTO IRIS key is press
again. An extremely useful function in an environment where there are a lot of movements
constantly ie. shopping centers etc.
Iris Control
The purpose of iris control is to adjust target’s brightness.
It can be set as Auto Iris or Manual Iris.
☞ ①
① ①
①
Iris Open
Push IRIS O key (one beep should be heard) , to
open the iris and brighten the picture. Iris will stop
when the key is released.
☞ ②
② ②
②
Iris Close
Push IRIS C key (one beep should be heard) , to
close the iris and reduce glare. Iris will stop when the
key is released.
☞ ③
③ ③
③ Auto Iris
Push AUTO IRIS key (one beep should be heard and
LED will illuminate) , to select the Auto Iris mode.
Horizontal 180
°
°°
°
Instant Flip
Some times it is hard to use the joystick to control the camera tracking the target directly under the
camera. The instant flip key can rotate the camera 180
°
instantly. This allows the camera continue
to track the target passing directly under the camera.
☞ ① ① ① ①
180
° °° °
Instant Flip
Push 180º REV key (one beep should be heard) , to
flip the camera 180
°
horizontally.