INSTALLATION
2. Put the provided screws (M3.0 x 25, wooden screw) through
the holes marked as "a", and fix the base in the desired area
(FIG.1).
1. Please use the enclosed screw driver to untighten the 4
tamper-proof screws on the dome cover.
FIG. 1
a
a
a
3. Firstly, put video cable and power cable through a pipe with
1/2" PT at one end (FIG.2), and connect the cables to the
terminal block on the PCB accordingly and then screw the
pipe to the side hole (FIG.3, please make sure the
connection between the pipe and the side hole is watertight.).
Pipe is not provided.
NOTE :
FIG. 2
FIG. 3
VIDEO
GND
VIDEO
OUT
POWER
INPUT
